Wiha recently introduced their new “26inOne” Ultra Driver which includes 13 double-ended bits for a total of 26 different tip sizes. The bits are stored in the handle in a double layer pop-up carousel. There are three versions of the Ultra Driver currently available — each with a different selection of bits.

Wiha 77790 “Tradesman”

• Torx: T10, T15, T20, T25
• Phillips: #0, #1, #2, #3
• Pozidriv: #1 & #2
• Square: #0, #1, #2, #3
• Slotted: 3.0, 4.5, 5.5, 6.5mm
• Metric Hex: 3.0, 4.0, 5.0, 6.0mm
• Inch Hex: 1/8″, 9/64, 5/32, 3/16″

Wiha 77791 “Technician”

• Torx: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30
• Phillips: #0, #1, #2, #3
• Pozidriv: #1 & #2
• Square: #0, #1, #2, #3
• Slotted: 3.0, 4.0, 4.5, 5.5, 6.0, 6.5mm

Wiha 77792 “Industrial”

• Torx: T8, T9, T10, T15, T20, T25, T27, T30
• Phillips: #1 & #2
• Slotted: 4.0 & 6.0mm
• Metric Hex: 2.0, 2.5, 3.0, 4.0, 5.0, 6.0mm
• Inch Hex: 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4″

Both the handle and bits are made in Germany.  Wiha cautions users that these double-ended bits are only compatible with the Ultra Driver handle as well as the Wiha 76000 bit holder — they will not work in non-Wiha bit holders. Replacement bits are currently available in refill packs (pictured below) and there are plans to offer the double-ended bits in 2-packs if you are looking to just replace a couple.

Refill packs: 77780 – Tradesman; 77781 – Technician; 77782 – Industrial.

The current MSRP on the three Ultra Drivers is $69.98 but can be purchased at a heavy discount while they are new.  These new Ultra Drivers make great gifts!  They are also great to keep in a junk drawer, glove box, boat, etc.